stenh02

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: Diplomat ADP 8221 #153454
    stenh02
    Participant

    Re: Diplomat ADP 8221

    Yes, power off…..actually got the wife to press the button..he he.

    The mechanics/insides/underneaths appeared very clean and she was wanting to see, then pushed the red button!

    So, I wasn’t in danger anyway, lol


    Grant

    in reply to: Diplomat ADP 8221 #153452
    stenh02
    Participant

    Re: Diplomat ADP 8221

    Actually ripped the lower valance off around the base units tonight and found the re-set button on the thermostat. This has done the job..the first real wash for 2 weeks….Yippee.

    Thanks again

    in reply to: Diplomat ADP 8221 #153451
    stenh02
    Participant

    Re: Diplomat ADP 8221

    Thanks, will give them a call on Monday.

    Thank you for the help, and the heads up on the local boys.

    Grant

    in reply to: Diplomat ADP 8221 #153449
    stenh02
    Participant

    Re: Diplomat ADP 8221

    Cheers,


    Unfortunately none in my area.(AB39)

    Is there a SMEG serial number as well?


    Thanks for all your help.


    Grant

    in reply to: Diplomat ADP 8221 #153447
    stenh02
    Participant

    Re: Diplomat ADP 8221

    Bounce 😆

    in reply to: Diplomat ADP 8221 #153446
    stenh02
    Participant

    Re: Diplomat ADP 8221

    and…how can it still be not being able to heat the water when the element is hot and so are the plates????


    G

    in reply to: Diplomat ADP 8221 #153445
    stenh02
    Participant

    Re: Diplomat ADP 8221

    Dave, you are right, the manual is an 8221, but the sticker says it is an 8112…

    What a mess!

    Is this still a SMEG…

    And are the LED errors the same then….(on, on, off, off, on)


    Grant

    in reply to: Diplomat ADP 8221 #153444
    stenh02
    Participant

    Re: Diplomat ADP 8221

    Will do when I get home. The instruction book is def. for the 8221, but saying that the picture of the control panel is slightly different to the actual machine.

    There are five LED to correspond to 5 diff. cycles (rinse, delicate, eco, normal, heavy pots) on the left and a black selector button next it. The on/off button is on the right hand side.

    No other buttons, no digital read out panel.

    Grant

    in reply to: Diplomat ADP 8221 #153442
    stenh02
    Participant

    Re: Diplomat ADP 8221

    I ran it empty (no dishes and no soap) last night on the eco cycle.

    Still got the E3 error this a.m. (LEDs on, on, off, off, on).

    Do I need a big hammer?

    Grant

    PS Is it a particular model of SMEG?

Viewing 9 posts - 1 through 9 (of 9 total)