[Stephen56]

Hi there, I lost the thread when computer crashed, then Christmas, then Covid! Yes, it is draining OK.
I gave the filter a good clean (as I regularly do) checked it was well-balanced on the floor, since when it has spun at least at 800 even when on 1600, and generally most things coming out acceptably well. Still not sure why 1600 isn’t happening when loaded, but only when empty. Hey ho! Can’t have all things, and the machine continues to run after 10+ years pretty well. Thanks for your interest and advice. If it goes “wonky” again, I’ll come back to the forum. Cheers, Stephen.

[Stephen56]

Hi there again. I did a a “push test” and it popped up with what I can only describe as a bit of “double shudder”, and it did come back up more to one side before settling centrally.. I don’t think I pushed down too hard. (I took a video but don’t know how I could share that.) The springs sometimes creak when the machine is in use (not when spinning) but we’ve got used to that. Cheers, Stephen.

[Stephen56]

Thanks for that advice. No error messages (3 dashes), and it doesn’t appear to be struggling balancing the load before going into spin, but I will watch more closely. I’ll also do the press test and watch for bounce. Thank you

[Author]

Posts