steve32

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: bosch wvf2000 washer dryer noisy spin #124290
    steve32
    Participant

    Re: bosch wvf2000 washer dryer noisy spin

    hi penguin45

    think i might the struts sounds like it`s my best option
    thanks again
    regards steve32 😉

    in reply to: bosch wvf2000 washer dryer noisy spin #124288
    steve32
    Participant

    Re: bosch wvf2000 washer dryer noisy spin

    Penguin 45

    If this is notorius bouncer does that mean other machines (same model)
    don`t bounce , different parts used or just duff model
    Can the dampers be upgraded these one`s seem to be plastic outer sleeve and don`t have much about them, any idea what the max load weight is (wet or dry)

    Thanks 🙄
    steve

    in reply to: bosch wvf2000 washer dryer noisy spin #124286
    steve32
    Participant

    Re: bosch wvf2000 washer dryer noisy spin

    Martin

    Thanks for the reply

    Fd7904 00182 is the no.
    it`s about 6 years old i think had it from new never had much luck with washer dryers but pushed for space (had 2 hotpoints before this)
    the motors ok not long been cleaned and new carbons fitted.New timer fitted about 2 years ago after faulty spin.It all seems to work fine just
    really shake`s the life out of itself , it shake`s so much the condensor bangs against the side of casing and the front plastic panel broke at the fixing points the front metal panel broke at the bottom fixing points. There is a point before the spin cycle where it does short quick spins ,i think to distribute load after wash, but this bangs the machine aswell.
    have you ever heard of the lower suspension failing or know of any test
    to check it.

    Steve 🙁

    in reply to: Bosch WVF2000 Washer Dryer – Steamy Clothes #122332
    steve32
    Participant

    Re: Bosch WVF2000 Washer Dryer – Steamy Clothes

    hi

    just joined
    it seems you may have a problem with the thermal trips located on the top of the dryer element housing there are three one should be resetable(small button on it) you will need a multi meter to check. i had this problem and bought the parts direct from bosch spares . be sure the machine is isolated before checking anything

    steve

Viewing 4 posts - 1 through 4 (of 4 total)