[SteveArnell]

Re: Advice RE White Knight CL372 Rear Drum Bearing/Fan/Capac

Just to conclude…..

I fitted the parts sent by David….and my old tumble dryer now works a treat !!

Many thanks to David and this site for solving my problem….all for £15 !

Hope I can turn to this forum for help in the future, if i need it….

All the best,

Steve Arnell,
Swindon

[SteveArnell]

Re: Advice RE White Knight CL372 Rear Drum Bearing/Fan/Capac

David,

Thanks for your response. I’ve not recieved anything in my personal mail from you yet…?…maybe I posted the wrong address. it’s

steve.arnell@ntlworld.com

As I said in my post earlier, I’m looking for a Front Control Panel, with The timer and Knob and the Toggle Selector Switch for the Hi / Low temp setting.

Let me know what you’d be willing to accept for your’s, please.

Much appreciated…. and Best Regards,

Steve Arnell

[SteveArnell]

Re: Advice RE White Knight CL372 Rear Drum Bearing/Fan/Capac

Hi there David.

I read your thread with interest. …..Like you, I cannot bear to throw away that which can be made to work (hopefully, economically !).
I admire your endeavours to make your White Knight Tumble dryer work, having found myself in a similar situation.
The difference is that I’m trying to make my old Phillips (precurser to the CL732?) work by replacing the front control panel c/w 120 min. clockwork timer, knob and Hi-Lo temp toggle swich.
Given the cost of the new spares (very helpful at Crosslee Spares !!) I might as well spend £90 on a new CL372……unless you were prepared to part with those parts off your old one..??
What do you say?….Make me an offer maybe?… (I understand if you’d rather kep them as spares for your “new” machine..)

Regards,

Steve Arnell

[Author]

Posts