[suckymotor]

Re: Error Code 00100101 and 00001100 (37 and 12)

Yep – that’s what it was. I picked up a reconditioned PCB from a local parts outlet and now it works perfectly. FYI to anyone else reading, Guinness Appliances in Tauranga sell motor controller PCBs new for $190 or reconditioned for $115 and they’re very easy to install. Thanks for your help Chris 🙂

[suckymotor]

Re: Error Code 00100101 and 00001100 (37 and 12)

Actually I just tried it now and then ran another cycle. It stopped again with error code 00100111, which I see posted as ‘change in water level not deteted within time allowed’. Kind of makes sense seeing as it was supposed to be a 1/2 load and the machine had filled up 3/4 when it stopped.

I see there’s a blue wire inside the tube – is that supposed to be connected to anything? It stops about 2 inches away from the very top of the tube.

Also, even though the machine was completely empty when I blew through the tube, I could definitely feel some sort of resistance – is that normal?

[suckymotor]

Re: Error Code 00100101 and 00001100 (37 and 12)

Legendary – thank you Penguin45, I’ll have a go at it this weekend.

[suckymotor]

Re: Error Code 00100101 and 00001100 (37 and 12)

Thank you so much. The pump operates very well, so I’ll check out the tube. How do I access it? If it turns out to be the switch, is it possible some contact cleaner might fix it?

[suckymotor]

Re: Error Code 00100101 and 00001100 (37 and 12)

I forgot to mention that just before it gave up the last time, I also noticed the agitator was irregularly twitching one way then the other. That was just after the machine had finished filling the water.

[Author]

Posts