Forum Replies Created
-
Posts
-
Re: Integral Diplomat ADP8132 from MFI
Hi Penguin45,
I hadn’t checked the forum since posting the original thread so thanks for responding. I have replaced the drain pump as it was suggested that it might have burned out. This has made no difference.
It powers up. I can select any of the programmes and the machine seems to start. When it was working you could hear a few seconds after starting on a normal wash the water pouring in rapidly to the machine. Now you hear the machine power up and go into the cycle but no water flowing in. After 5 minutes or so the cycle stops and when the door is opened there is a small amount of water in the bottom but no water anywhere else.
If I put the machine on the hottest wash, the element heats and smells of burning I guess becasue there is no water covering it. On normal washes the element doesn’t heat as much and doesn’t smell of burning. I have checked the red element buttom and it seems OK.
Any further help would be appreciated.
