[Swift]

Re: Diplomat ADP8132

Thanks for that Penguin 45 . I have removed the large blue plastic section thats atatched to the water softneron the R/H side. The large hole that is revieled was well gunked up I have cleaned this out & I think it goes through the sump behind the rubber flap/valve ?. This also I have cleared out. Then I refit the large blue plastic section after metering both air pressure switches (one atatched to blue section the other on the belly plate) Both tested OK. When I came to re-test all that happens now is the 2 R/H red lights come on & I cannot clear them . My limited user instructions shows no fault code for this. What have I done ??

Regards

Chris

[Author]

Posts