[taj]

Re: Siemens 6120 error code 1

😀 😀 😀 😀 😀 😀 😀

It’s fixed…..turned out to be one of the inlet valves on the cold water feed….

I got the part from uk Whitegoods….great service ….works like a champ and no fault codes…

And all because of this forums’ help….thanks greg and penguin45

[taj]

Re: Siemens 6120 error code 1

Thanks Penguin45! Its on order…..will keep you all posted once i have received it and fitted it.

fingers crossed..

[taj]

Re: Siemens 6120 error code 1

Ok…So we are getting somewhere. Turns out that one valve on the twin inlet assembly is not working. So I need to replace it. Can I use a generic part such as those listed on this website, or do I have to get the Siemens one….£50 is a lot of dosh for a 12 year old machine…Also, there is a bosch twin inlet listed on this site which is priced at £19.99…..Could I fit this one?

The generic parts seem to be 90 degree or 180 degree so could these do the job?

thanks.

[taj]

Re: Siemens 6120 error code 1

Hi Greg,
I will check the resistance across each valve tonight. Final question for the time being, Where do I get them from if they are faulty?
thanks

[taj]

Re: Siemens 6120 error code 1

Hi Greg,
Thanks for responding, I have the hot and cold fills connected so both valves should have the same values? How do I get into the machine? Two screws in the back of the machineat the top, that hold the top on, and then just pop the top off exposing inards? Do these valves fail on a regular basis in your experience? Anything else i should do while i have it open?

cheers

[Author]

Posts