[Targatopp]

Re: Jlwm1204 stopped mid cycle

Hi Dave yes chip is lnk ..there is a local circuit board company..i will see if they will solder new bits in once i have the parts many thanks paul

[Targatopp]

Re: Jlwm1204 stopped mid cycle

Thanks dave…any idea who can supply the resistor and what resistance should it be/is it?? and again same question for power supply chip,…what does this chip do?

I think the black things are diodes as they are marked d4 d6 etc..

capacitors have a c number

[Targatopp]

Re: Jlwm1204 stopped mid cycle

Hi just checked circuit board.large green resistor has broken in half so needs replacing.this is below 2 pin socket in bottom middle of board
Brown resisistor reads 0.05 ohms this sits above 3 capacitors on bottom rhs of board.position L2
Immediately below this resistor is a small black resistor… or is it a diode. PositionD7 ????? This reads open circuit…..??????

And then a similar black resistor do diode position D6 below the capacitors on bottom rhs reads 176 ohms

Lastly resistor or diode? in position D4 just to the right of the green resistor at bottom middle of board reads open circuit

Hope this makes sense..I tried to attach photo but it’s too large a file to include

Many thanks

Paul

[Targatopp]

Re: Jlwm1204 stopped mid cycle

Thanks Dave will take a look tomorrow and report back

Much appreciated paul

[Author]

Posts