[tbtd]

Re: FISHER & PAYKEL Intutive IW811 Service Manual wanted

bigsmokepiker wrote:More cases than not likely Motor controller Fault (Main Module)
In some instances can be RPS(rotor postion sensor)This is the smaal PCB Clipped Into Motor

.
Thanks for your reply i inspected the PCB embedded in the motor besides a little dust it appeared to “look” ok.
From the diagnostics on the machine I was able to see the rpm feedback from I assume this sensor and it appeared to be reading consistently when i moved the bowl by hand and when the motor drove the bowl as well so I have more or less ruled it out.It just seems bizarre that it only does it during the rinse cycles??

[tbtd]

Re: FISHER & PAYKEL Intutive IW811 Service Manual wanted

Penguin45 wrote:Hi ST,
Welcome aboard, I’ll see what I can find… 😉

Penguin45.
Hi P45 you sound very knowledgeable on the F& P machine I have the same machine and am also looking for a service manual for it .I have a similar issue of error 136 occurring during rinse 1 or rinse 2.I understand this relates to the motor stalling .I have dismantled the motor and it looks like new and is very free to rotate and shows no signs of water ingression or corrosion the same with the controller and the wiring.Any ideas?
your help would be most appreciated

[Author]

Posts