[tfer]

Re: De Dietrich Induction Hob DTi 789V

tfer wrote:The hob failed after an extended power off. After restoring power the left side dual cooking area (continuum), has failed completely. There are no error codes, no response from the control panel either half or full. No lights at all – dead.
this was installed April 2010.
The two cooking zones on the right are working perfectly.
I understand there are cooling fans and appreciate that a failed fan could inhibit power to the cooking zone but i would expect an error code.
I will be grateful for any guidance and if the best suggestion is a PCB, then the likely cost and availability.
Many thanks

I cannot find the edit button so have added the additional information using the reply button:

This Hob installed April 2010 Model: DT1789v Ser: 094801955
On power on after extended power down, the following codes are displayed on the RH touch panel. A1. 1F. 05. A3.. The LH touch panel remains blank, shows no lights/codes.
After these codes timeout the 2 RH zones work normally but the LH continuum touch panel does not respond to any input (no lights/codes and cook zone not powered).
I will be very grateful for any information.

kind regards
Tony

P.S. please flag as unanswered.

[Author]

Posts