Forum Replies Created
-
Posts
-
Re: liebherr f2 error code
Well I just received the product… and guess what…
No schematics where the sensor is. Just a drawing of how to wire the wires for the connector.
Please help me out… the alarm is driving crazy my family for over a week now. please?
In case you need my mail it’s thanosc@hotmail.com
thanx in advance.Re: liebherr f2 error code
alf_uckem wrote:hello, f2 is a fridge evaporator sensor fault, picked up by the pcb when there is a problem with the sensor.
it appears that the sensor you’ve been removing and drying is the air sensor.
the evaporator sensor is situated behind the plate on the back of the fridge.
you’ll need part no: 9590142 and the fitting instructions are in the pack.cheers.
thanx for the answer. But I’m a bit confused…
Well the part number you gave me says it’s an 9590142 – Liebherr Fridge & Freezer Air Sensor.
Are you sure this is the fridge evaporator sensor?
They have the same product description?
Cause I found this too:6942074 – Liebherr Evaporator Sensor.And when you say “the evaporator sensor is situated behind the plate on the back of the fridge” in the back from the outside or from the inside of the fridge.
Re: liebherr f2 error code
Hello and thanx for this site – forum – shop.
Everything looks in order here and I hope I will find my solution.
Well I have a Liebherr refrigerator
this one:For some months now I get a F2 error code at the display and a sound alarm that doesn’t go off. I cut off power for 2 days I cleaned the back as mentioned and above also I opened the plastic on the top and used a hairdrier for this sensor
But this is the air sensor not the moisture one right?
Anyway after I plugged it in it worked just fine for about 2 months and the F2 error came back. I did the same but it lasted just for 1 week.
Which sensor should I buy to replace and maybe some guidance for putting it correctly and not brake anything?
thanx in advance.
