[TheDaddy]

Re: Indesit DVG622wh not heating

Just to say thanks to iadom and Penguin45.

I got the PCB from CG Domestics for about £55 inc. Arrived in about 3 days. Fitted no problem – a bit fiddly but not too complicated.

All now working. We finally have a hot wash.

I now know a lot more about the insides of a dishwasher than I set out to know but at least I have saved spending £300 on a new machine (and I have a spare element!)

Cheers
TD

[TheDaddy]

Re: Indesit DVG622wh not heating

Iadom,
Thanks for the quick response. I did check the resistance of the element and it was OK but I was sure I was getting voltage at that point, so thought there must be some other fault with it. I’m not an engineer…

Can you suggest any way to confirm it’s the PCB before I spend any more money on it? I have taken the PCB out and checked for any dry joints etc but nothing obvious.

Thanks again.

[Author]

Posts