[thedime]

Re: F&P AW095 Error 00110001 49 cold inlet but is motor

Great News, I replaced the cold inlet and its all working again.

The controller must sense the no water was added on the first rinse cycle so it would just keep repeating that and not advance. (when the cold inlet was dead)

But all ok now with new valve, the replacement was slightly different to the old one, the power Connector was 90 degrees straight out instead of from underneath like the old one, and it had a different PN, FP420148, the parts store said that the original part was super seeded.

Thanks Penguin45! the forum was a great help.

[Author]

Posts