[timday04]

Re: Leaking Bosch WVF2402GB/02 Washer Dryer

Hi

The parts arrived the other day and have managed to fit both the seal and a new metal band as the old one was rusty. I cleaned up the all the surfaces and put it all back together and ran a cycle but there still seems to be a very small drip coming from the band. I took the front off again today and tweaked up the tension on the band even more so perhaps that will cure it. If this doesn’t work the only other option would be to dismantle it and run a small bead of sealant round the surfaces and refit the seal but it shouldn’t really need it…..

PS It was a nightmare job!

[timday04]

Re: Leaking Bosch WVF2402GB/02 Washer Dryer

Martin wrote:

timday04 wrote:
PS Any idea how old this machine is (my mum can’t remember)?

Tell what the 4 digit FD number is on the inside of the door (FD = Fabrication Date) 😀

Will have a look when I am next at my mums and post the details. I have ordered the rubber seal – any tips for making the job easier? I suspect it might be easier to rest the machine on its back to split the drum and replace the seal?

Thanks

Tim

[timday04]

Re: Leaking Bosch WVF2402GB/02 Washer Dryer

Hi Martin

Many thanks for the prompt reply – will order the parts and give it a go!

Tim

PS Any idea how old this machine is (my mum can’t remember)?

[Author]

Posts