[tomlin100]

Re: Replacing neff hinge runners/bearings

martin, your post is quite offensive actually. the suggestion that by simply asking questions to be as prepared as possible implies something about my competency is ridiculous. if you don’t have any thing more to contribute, then don’t post. I’m sure even you with your forty years experience of fixing appliances remembers the days when you knew less than you do now, it’s a shame you feel you can’t share your past experiences with others.

[tomlin100]

Re: Replacing neff hinge runners/bearings

Thanks for your replies.

Do i need to detach the box containing the digital display/controls?

Is it best to have the oven on its front to remove the panels?

Would you expect me to have to apply any force, or after the screws are removed the panels should come off quite easily?

(trying to assemble as many tips as possible before i have another go at this)

[tomlin100]

Re: Replacing neff hinge runners/bearings

Ah I thought using a spatula wasn’t a good idea 🙂

Even after removing the side panel screws along the edges they seem unmovable and I see no obvious screws holding the bottom panel in place. Is it really as simple as removing all the screws or are there clips or something else holding it together?

[tomlin100]

Re: Replacing neff hinge runners

Do you have any hints on how to remove the side and bottom panels?

[tomlin100]

Re: Replacing neff hinge runners

Thanks for your reply. I actually replaced the hidges about 3 months ago which solved the problem initially but the problem has returned.

This is what I mean by runners:
http://www.espares.co.uk/part/cookers-and-hobs/hinges/neff/u1661n0gb{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2F02/p/1598/1126/0/548645/664231/oven-door-hinge-runner.html

[Author]

Posts