[Tuftini]

Just to follow up on the problem, I changed the heater pump, and now there is full flow again which is good. However now the water is not heating. I have wired it up correctly, there were some changes needed to the wiring due to the pump being an updated model.

[Tuftini]

Ok makes sense thanks for the help Dave.

[Tuftini]

It’s half open when you look down into valve and you can move it about quite easily

[Tuftini]

it’s difficult to know if the distributor is working, but I dont think so. The pump is definatly operating. But just almost no pressure getting through to the spray arms. I think the distributor assembly or valve motor has failed..

[Tuftini]

Thanks Dave I will try and check that out and post back for others in future.

[Tuftini]

[Tuftini]

Ok so this evening I removed the circulating pump and it’s clean, nothing blocked in the pipes or in the pump itself. Pump is obviously rotating somewhat because there is a trickle of water but either not properly spinning or there is something stopping the water getting through. There is some kind of valve which rotates a plastic disc allowing water through up into the spray arms but I’m not sure how this operates or should work. I think there is a solenoid..?
anyone able to help me out, missus going potty I either fix it or have to buy a new machine…. before Christmas

[Author]

Posts