Forum Replies Created
-
Posts
-
Re: Indesit WIE 147 fault, Help Needed.
Just an up date for those that may wish to know, I tested most parts using my multimeter, eg, motor, heater, ntc thermistor, pressure switch, could not come up any faults, my thought was the main module, but i was unsure, and was not going to spend over £100 on a new one just to try it. I was 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it was the module from the tests, so i looked on ebay, could not see one for WIE147, but did see one for WIE167 at £29, because i was 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it was the module, i took a chance on this part, as the only difference in the 2 machines is the spin speed, (167 is 1600rpm and 147 is 1400rpm). Part arrived yesterday, i fitted it today, and bingo, all back fully working, no faults, no F-08 fault. I have done 2 complete wash loads today, all back to normal, cost £29, Cheers.
Re: Indesit WIE 147 fault, Help Needed.
Ok, cheers i will let you know how i get on , will do more tests first before i ditch it, thanks
Re: Indesit WIE 147 fault, Help Needed.
Ok, but can anyone pin point the fault, something has to be the fault ? something must be able to be replaced and make it work again, regardless of cost, ??
