[WEENY]

Re: GENERATION 2000+ / NOT GETTING HOT ????

Many thanks for your reply Dave,

I know that it is a difficult one to answer, but out of 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} how likely is it to be the NTC, and any idea of where abouts it is located as I might have a look tonight to make sure all wires seem to be connected or would this be a waste of time.

Thanks again
Ian
P.S. I might just take the chance if it is easy to change

[WEENY]

Re: GENERATION 2000+ / NOT GETTING HOT ????

Many thanks for your reply,

I have searched through forum for NTC and it appears that other people seem to have flashing lights and bleeping sounds.
My dishwasher must be strange as it works like normal but during or at the end of the cycle you would expect the water to be hot but it is cold all the time, it seems to fill and drain fine.

Is it best that I call an engineer out (Whirlpool £72.50 + Parts) or can the NTC (is this part expensive) be replaced as a DIY.

MOD G2P DWI/1 WH
SERVICE: 8542 347 15810
SER: 33 0323 003629

My post code CO6 1LX

Also how does the NTC work with regards to the hot water

Hope you can help

Thanks
Ian

[Author]

Posts