[westons]

Re: hotpoint tdc 62

I’ve got my multi meter and i’ve tested the continuity of all three stats, and all are fine. I class my self as being competent at some technical things as I’m a gas and boiler engineer, do you think that the fault is to do with the pcb or dryness module, do you think that i will be able to identify and fix the fault?
Steven

[westons]

Re: hotpoint tdc 62

Hi Jim, apologies again, I have already removed both stats and checked them like you instructed, Ive removed the door stat to see if there are any signs, but this appears to be a different type of stat. I will buy a multi meter now from B & Q.
Cheers
Steven

[westons]

Re: hotpoint tdc 62

Hi there again,
Sorry Jim, I just took a visual inspection and presumed that they were ok. Would the stat on the inside of the door have any visual clues if it had tripped, I still havent got round to getting the multi meter (New Baby). Thanks for the replies
Steven

[westons]

Re: hotpoint tdc 62

Thank you for the speedy reply, The two stats on the back are o.k., and I havent got round to buying a multi meter yet. Any clues to what else the fault might be?

[Author]

Posts