[Wildfire]

Re: Diplomat ADP8902 – Error Code not in manual

Hi,
Thanks for your reply, I opened up the machine this evening, and funnily enough there was a good half litre of water sitting in the bottom.

I cleaned it all out, with a cloth/sponge. Made sure the floating sensor was reseated and then ran a rinse cycle. This all worked OK. I then ran a full cycle to make sure it was definitely OK before I pushed it back in under the work surface and it worked perfectly!!

I’m not sure what caused the initial flood (however I have read these dishwasher tablets with the outer wrapper which dissolves aren’t suitable for slimline dishwashers and tend to cause issues as the wrapper doesn’t properly dissolve) – however I don’t know how to true that is… but I do intend on running an intensive wash tomorrow with a Dishwasher cleaner through the machine, just incase the pipes are a bit scummed up.

Many Thanks for your quick response to my question and you really have saved me a fortune in getting an engineer out to fix it! Appreciate your help!

Kind Regards

[Author]

Posts