[wilko]

Re: Siemens SE25A090GB/17 – Stuck on 1 min + other issues!

thanks.
reset it, now fixed.

[wilko]

Re: Siemens SE25A090GB/17 – Stuck on 1 min + other issues!

right, I’ve cleaned the feed pipe, flexible one going from left hand side of machine to the chamber in the middle, and cleaned out that chamber.

No difference, machine still won’t fill, but runs, so it thinks it has water in it.

Any other ideas?

Thanks

[wilko]

Re: Siemens SE25A090GB/17 – Stuck on 1 min + other issues!

thanks penguin
I started dismantling yesterday. I’m panning ondoing all of the above today. I’ll report back.

[wilko]

Re: Siemens SE25A090GB/17 – Stuck on 1 min + other issues!

Hi
I’ve got the same machine, but my problem apears to be different.
The machine doesn’t fill, but the circulation pump runs, so I guess the machine thinks it has water in.
There is no power onto the fill solenoid (I assume these are the 2 wires that go up to the unit that screws onto the tap), so I guess it’s not the solenoid thats failed.
The matrix on the side is prety clean, and the float moves up and down freely. Is the other microswitch above the float one to do with the water level?
If not, what is?
Any help gratefully recieved.

[Author]

Posts