Forum Replies Created
-
AuthorPosts
-
Wishywashy62
Participant[USER=”60″]dave[/USER] hello again, I eventually managed to get the back panel off the machine and the top lid,
it looks very complicated in there but I’m willing to give it a go, just need some direction on what to unscrew looks like the dryer fan maybe ?.
Would greatly appreciate your assistance again and if possible diagrams they were very helpful, anyway I know it’s Sunday probably your day off but don’t worry whenever you get time thank you so much again in advance .Wishywashy62
Participant[USER=”60″]dave[/USER] thank you so much .
I will attempt this tomorrow.:):)Wishywashy62
Participant[h=1]Zanussi WJD1457W (91460141800) Washing Machine Dryer Spare Parts Diagram[/h]

- 3 Thermostat Temperature Regulator
- 003B Temperature Regulator
- 4 FAN MOTOR
- 10 Heating Element 1840w
- 18 Ventilator Assembly
- 48 Temperature Probe NTC
- 048C Temperature Probe NTC
- 110 Hose solenoid connector
- 110B Hose Dispenser To Tub
- 110D VENT HOSE CAPACITOR
- 125 Manual Re Set Thermostat O – Ring Seal
- 127 AIRBREAK
- 130 Heater Element Sealing Sleeve
- 130A Thermostat Gasket Seal
- 130B GASKET
- 135 Heater Element Assembly Case
- 135A ASSEMBLY DUCT FRONT WD BD
- 146 assembly Capacitor vertical WD BD X
- 251 BUMPER FAN.
- 253 Blower Motor Belt
- 540 FIXING CLAMP WARM INSULATION C
- 540 FIXING CLAMP WARM INSULATION C
- 540A FIXING CLAMP DUCT RUBBER BELLO
- 557 WARM INSULATION UPPER CHANNEL
- 557B WARM INSULATION DUCT FRONT
- 557C WARM INSULATION CHANNEL DRAINA
the part I can’t get access to is 146 ,Marked with X.
I also have problem with button panel not sure if that’s the right terminology I’m not very techy. Anyway thank you so much for everyone that replied and hope maybe you can help me fix my machine.
sorry if I was a bit unclear I’m not used to being on forums I will try to be clearer in futureNovember 16, 2019 at 9:42 pm in reply to: Zanussi washer WJD1457W .. Help removing front panel #464662Wishywashy62
ParticipantThank you , I thought as much myself because the front part contains the spring hooks holding the drum.
somewhere another forum people were saying you can take off the front part but you must put the backpack back on as stability. I don’t think this is quite right , I tried turning it on its back but it has a floor panel which makes access not so easy, thank you .any idea how to remove the big plastic ducting directly under the fan and along the sides to unclog and wash this part??
Wishywashy62
Participantelectrofix wrote:Re: Zanussi WJD 1457 w washer/dryer
on that model the rear case comes off as a wrap. it splits in the centre of the case at the sides. only undo the screws for the rear half. once off access is great
Dave
Hi how do I remove the front panel as I need to get to the water chamber hope you can help thank you
-
AuthorPosts
