[wood7998]

Hello, I am desperate for some help with my g6620 dishwasher which is showing the red inlet/drain light and does not continue with any of the cycles. It pumps out as normal and then the cycle stops, I have checked the inlet filter and water valve solenoids which are delivering almost exactly 2.5 litres per min. I have replaced the reed valve which was working ok anyway I have now removed the main pump to verify the impeller is not stuck all to no avail, is there anybody who can check the pump is operating as it should whilst I have got it out or is there anything else you can suggest and by the way I have checked and the heater coil by the impeller works ok any help would be greatly appreciated, thanks in anticipation, John

[Author]

Posts