Forum Replies Created
-
Posts
-
Re: Whirlpool ADP 7966 Fault code F7
Righto, so I get really angry with my machine, write out its ebay ad for spares, give it a punch, then one last chance, and it obliges?!
Well if it can just clean the load that’s in it before it dies, that’s something, I guess, lol!
@cookermann – you’re so lovely 😀 thanks for your help. Have emailed Whirlpool to see if the sell the mini circuit board thingy separately 🙂
Oh, and looking through Adtrader, there’s one for sale, same model, same fault, lol!
That water chamber is used in dozens of machines – may keep an eye out on ebay for a similar model going cheap 🙂
Re: Whirlpool ADP 7966 Fault code F7
Hi guys, thanks for all your help. I’ve checked and rechecked absolutely everything on this machine now and still same problem 👿
A new water chamber / flow meter is £62 plus delivery, and I can’t even see anything wrong with the old one, so it can’t be guaranteed that it is that. Maybe it’s something else, possibly something even more expensive?!
I have no idea how much an engineer call out would be, I’m guessing at least £60 just to get him here and have a look at the machine…
Is it worth it for a machine that’s very nearly 5 years old? Is this just the first of many parts in it coming to the end of their lives?
Yours dejectedly, Skint from South Wales 🙁
Re: Whirlpool ADP 7966 Fault code F7
Ah good, thanks for that, lol!
Bad news though, it’s broken down again 👿 , same fault, so will do that connector cleany thing and report back 🙂
Re: Whirlpool ADP 7966 Fault code F7
It’s completed the cycle now, so that’s good news.
Can anyone tell me if the salt compartment is supposed to be full of water? Cos it is…
Re: Whirlpool ADP 7966 Fault code F7
We did try that, and it didn’t seem to help, but it is actually going through a cycle now, so maybe it is a bad connection there… I’ll double check the connectors when it’s done.
It seems very gurgly on filling, but it’s still going. Hubby wondered if it may be a flood fault so we let it drain laying the hose on the floor, and a bit did come out, but not too much. It seems to be since then that it’s working actually, so fingers crossed it completes the cycle.
Cheers for the tip 🙂
