Ariston Margherita A1635

Home Forums Public Support Forums Help And Support Washing Machine Help Forum Ariston Margherita A1635

Viewing 15 posts - 1 through 15 (of 24 total)
  • Author
    Posts
  • #14515
    a0-0b
    Participant

    I see a lot of problems with these machines on the forum. I guess this is just another one to add to the list.

    Model A1635 – six (6) flashes …

    anyone know the fault codes?

    Thanks,
    Andrew

    #159722
    Dave_Conway
    Participant

    Re: Ariston Margherita A1635

    “Program selector management error”

    Which could be caused by a number of things to be honest.

    Engineer time for a fault like this, check the repairs@ link below 🙂

    Dave.

    #159723
    a0-0b
    Participant

    Re: Ariston Margherita A1635

    lovely, thanks for that!
    One problem solved anyway. Now for part II.
    During the course of my leaning what does what in washing machines i managed to twiddle the pressure switch settings. Is there anyway to buy anew one already setup? or is it not a big deal?

    p.s. thanks again

    #159724
    Dave_Conway
    Participant

    Re: Ariston Margherita A1635

    Yes, you can buy the pressure switch but assuming the “twiddling” was done after the fault occured I would leave it to an engineer to check the rest as replacing it may be an expense not required should the main fault be something major.

    If this was done before the fault then it may well be the cause of it 🙂

    Dave.

    #159725
    a0-0b
    Participant

    Re: Ariston Margherita A1635

    after … but we’re back with another problem now … 8 flashes!!
    this is turning into a nightmare … …

    p.s. tried the search engine – no repairs in my area

    #159726
    Dave_Conway
    Participant

    Re: Ariston Margherita A1635

    “Heater relay cannott be activated”

    I think you have an electronic problem to be honest, what’s the first part of your postcode, i’ll check a list I have here for an engineer ?

    Dave.

    #159727
    a0-0b
    Participant

    Re: Ariston Margherita A1635

    Would the relay cause a problem for spin cycle? I also get 4 flashes.
    The first part of my postcode is BT38 . . .

    p.s. i appreciate the help!
    beginning to wonder if a new machine might be cheaper

    #159728
    a0-0b
    Participant

    Re: Ariston Margherita A1635

    i did get £1.02, a sock and a tesco club card out of the machine.
    So maybe i can’t expect anymore

    #159729
    Dave_Conway
    Participant

    Re: Ariston Margherita A1635

    Ah, sorry the list I have only covers UK Mainland 🙁

    The 4 flashes relates to the pressure switch, I’m almost tempted to suggest replacing it and see if it sorts the problems but I’m concerned about other underlying issues but it’s your call 😕

    Serial number required to identify it and what type of connections (single leads/multi block plug) please as there are three versions.

    Power off at all times of course when checking :zap:

    Dave.

    #159730
    a0-0b
    Participant

    Re: Ariston Margherita A1635

    OK … sorry for the short responses before – i was using a tablet PC without a keyboard, which is not terribly good for long descriptions. Here’s the full story so far…

    First the wife noticed that the dial was clicking round constantly (which i now know was probably only a blocked drain), so she turned it off and on again to see if it happened again. Unfortunately second time round the hose at the top of the drum (from the inlet) got disconnected and water poured everywhere.
    Being the brave (for brave read stupid) engineer i am, i twiddled with just about everything in the machine before i noticed this 😳
    The first big mistake i made was to “have a go” at the selector knob, which i managed to taker apart and put back together without noticing anything wrong – unfortunately i also didn’t notice the two spring which provide the power to the stepper motor 😳 hence the first fault (six flashes)
    Well, i got that sorted (it was a miracle i could find them) and that’s when it changed to eight flashes ro four flashes. In either case the selector still clicks round and it won’t wash, spin or rinse. I figured that was probably too much for me to handle so i walked away …
    Ofcourse, after the weekend i decided to try again (who knows what posessed me) only to discover that the machine now rinses and spins. The was cycles start – but don’t finish and guess what – seven flashes now !! I’m guessing it’s still something to do with the heater, particularily as the water doesn’t seem to be warming and the clubcard i mentioned was half melted when it came out.
    Is the heater element easy to replace??
    Is it something that’s stocked here??

    As far as the model number is concerned, on the fron it says A1635, while on the back it says:

    A1636UK
    Type No: LB2000C
    0802705T0030

    #159731
    a0-0b
    Participant

    Re: Ariston Margherita A1635

    Can anyone help?
    seven flashes on a A1635?

    Thanks

    #159732
    Dave_Conway
    Participant

    Re: Ariston Margherita A1635

    It refers to the heater relay on the main PCB again (similar to F8) 🙁

    Dave.

    #159733
    Penguin45
    Participant

    Re: Ariston Margherita A1635

    Dave_Conway wrote:similar to F8) 🙁

    Or even – F8 😀

    Penguin45.

    #159734
    a0-0b
    Participant

    Re: Ariston Margherita A1635

    figures – no heat coming on!
    i think it might actually be the element given the melted clubcard.
    is this likely? or is it engineer time?

    #159735
    Dave_Conway
    Participant

    Re: Ariston Margherita A1635

    Oh Bum 😆

    Thanks P45 :wave:

    Dave.

Viewing 15 posts - 1 through 15 (of 24 total)
  • You must be logged in to reply to this topic.