Dyson Washing Machine Fault Codes

Spare Parts Experts

Fix your appliance today. Get the right part.

Our team of experts has vast knowledge of the industry. We’ll help you find any part you need and get it to you fast and cheaply from thousands in stock.

  • Thousands in Stock
  • Expert Support
  • Fast Shipping

Dyson washing machine fault codesThis set of fault codes for the Dyson CR01 range of washing machines with a digital display. 

Before you start any investigation of the fault or even remove the lid of the washing machine please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying washing machine spares from our spare part store and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer for your Dyson using the engineer search.

  Dyson Washing Machine Fault Codes

These fault codes are written for washing machine repairers and not for the general public by Dyson and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our washing machine fault finding guide from this link before you begin.

If you struggle or cannot find the appropriate fault code that you need for your Dyson machine please ask in the forums and the gusy there will do what they can to help and locate the meaning of the fault code you need

 

F1

Washing machine drum is overloaded

F2

Out of balance load detected

F3

Washing machine’s outer door detected open

F4

Washing machine’s inner door detected as open

F5

Washing machine has not drained

F6

Washing machine has not filled with water

F7

Washing machine motor tacho open circuit

F8

Washing machine has overfilled with water

F9

Fault code not used

F10

Overspeed detected, motor triac failure

F11

No motor action detected

F12

Invalid temperature sensor reading

F13

Washing machine not heating or heating not detected

F14

Flooding

F15

Gear change failure – too slow

F16

Not stopping – motor triac failure

F17

Not used

F18

Gear change failure – too fast

  Dyson Washing Machine Spare Parts

We have purposely not listed any Dyson washing machine spares in this article as Dyson spares were very expensive but now all spares for the old Dyson washing machines are completely obsolete and no longer available. To our knowledge Dyson now no longer support these products in any way.

  More Dyson Washing Machine Help, Advice And Guidance

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Dyson washing machine a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

Support for Dyson washing machines however is virtually zero these days.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.

You also have to be aware that fault or error codes are not a “magic bullet”, they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what washing machine fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them.

Please note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Dyson washing machine model please post a request to confirm this in the washing machine forum.

5 thoughts on “Dyson Washing Machine Fault Codes

  1. having replaced rectifier and fuse on pcb the machine is not filling although all else is working ie spinning etc.please can you assist?

  2. Afraid not.All parts for these Dyson washing machines are now obsolete so far as we know and the products no longer supported by Dyson.

  3. Hi got problem with washing machine
    Fault code outer door not locked when it is locked
    Code 395f5f4f5v2055 diagnostic
    Would appreciate if you could help
    Wouldn\’t mind engineer coming out and putting in second hand part as Dyson don\’t support anymore or parts
    Thank you

Leave a Reply to a seb Cancel reply

Your email address will not be published. Required fields are marked *