Connect Prices

Home › Forums › General Trade Forum › Connect Prices

Viewing 11 posts - 46 through 56 (of 56 total)
1 2 3 4
  • Author
    Posts
  • November 26, 2010 at 4:16 pm #288123
    robbra
    Participant

    Re: Connect Prices

    Sorry Petal 😉
    I’ve done 2 LGs this week for impellers falling off Plasets from Italy. Used Akolls as they are about the best nowadays.
    Rob

    November 26, 2010 at 8:00 pm #288124
    leavemetogetonwithit
    Participant

    Re: Connect Prices

    Trouble is the cheap Plasets and Askolls don’t have a toc. Whereas, I think, there is a toc in each of the Plasets on the LG. So you have to be careful what you pick to replace them. (I tend to err on the safe side and always fit a pump with a toc where the old one had one, and sometimes even where it didn’t.)
    I’ve never bought a double LG pump myself but its conceivable that someone else might want to. It only came to my attention when I was looking up what pump was needed for a WM14331 someone rang me about today.
    Mike.

    November 26, 2010 at 10:41 pm #288125
    stratfordgirl
    Participant

    Re: Connect Prices

    Nedis reasonable for LG spares: 5859ER1002F £33.15.

    November 27, 2010 at 12:34 am #288126
    leavemetogetonwithit
    Participant

    Re: Connect Prices

    Yep, see what you mean. Might be worth offering them £50 for their last remaining two in stock! Don’t expect they’ll be replenishing.
    Mike.

    August 18, 2015 at 8:46 am #288127
    johnmac11
    Participant

    Re: Connect Prices

    Just noticed my latest shocker when looking for a price for a Rangemaster DXD f/f control board part number 0061800135
    CDSL have two different versions in stock.

    The Flavel version is £67.70 to me
    The Baumatic version is £715.92 to me :eeek:

    Which version should I buy :rotfl:

    John

    August 18, 2015 at 3:00 pm #288128
    eastlmark
    Moderator

    Re: Connect Prices

    £805.41 to me John, what you complaining about?

    August 18, 2015 at 3:48 pm #288129
    johnmac11
    Participant

    Re: Connect Prices

    If you need one Mark I will get you one at a slight discount :rotfl:

    John

    August 19, 2015 at 7:32 am #288130
    eastlmark
    Moderator

    Re: Connect Prices

    johnmac11 wrote:If you need one Mark I will get you one at a slight discount :rotfl:

    John

    that will be the Scottish 41p discount rate I assume. 😀

    August 19, 2015 at 10:56 am #288131
    kladave
    Participant

    Re: Connect Prices

    I know this topic has been hammered before,but i kid you not where do connect dream up these trade prices?my price is nearly half of what Mark can get it for!

    September 16, 2015 at 5:22 pm #288132
    eastlmark
    Moderator

    Re: Connect Prices

    OT I know as its qualtex but if only we could get away charging the RRP for this:

    BEKBE462900010
    view alternates

    stock
    BEKO ELEMENT FAN OVEN 1800w
    RRP £68.23
    Dealer Price £7.69

    September 16, 2015 at 5:54 pm #288133
    johnmac11
    Participant

    Re: Connect Prices

    Just noticed another one today…..
    Rangemaster DXD control board part number 0061800135

    from Rangemaster £53.80 incl vat and delivery
    From Connect £89.58 incl vat excluding delivery
    From Connect same part number but listed for a Baumatic f/f £859.10 incl vat but with free delivery

    Which one should I go for 😆

    John

  • Author
    Posts
Viewing 11 posts - 46 through 56 (of 56 total)
1 2 3 4
  • You must be logged in to reply to this topic.