HOTPOINT VTD20G T/D

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOTPOINT VTD20G T/D

Viewing 3 posts - 31 through 33 (of 33 total)
1 2 3
  • Author
    Posts
  • March 19, 2007 at 10:48 pm #205797
    helo_75
    Participant

    Re: HOTPOINT VTD20G T/D

    alread have, its on pg1 of this thread, but, if it help, the vtd drum is 1703662, the condenser is 1703663

    March 20, 2007 at 12:31 pm #205798
    trusted
    Participant

    Re: HOTPOINT VTD20G T/D

    As mentioned earlier, today I did my first VTD00P rear shaft/bearing kit (HPT1703080) replacement. It took me nearly 2 hours 😥 I had a lot of trouble removing the remains of the front air duct seal and drum rear seal. The old adhesive being very difficult.

    I found the existing setup had a M10 washer in use so I used it again.

    Also my first use of my new belt fitting tool (HPT5600266).

    March 20, 2007 at 4:17 pm #205799
    Martin
    Participant

    Re: HOTPOINT VTD20G T/D

    trusted wrote:The old adhesive being very difficult.

    I think you’ll find WD40 shifts the adhesive better than most substances, though that too is messy and hard work anyway. 🙁

  • Author
    Posts
Viewing 3 posts - 31 through 33 (of 33 total)
1 2 3
  • You must be logged in to reply to this topic.