ISE10 1606W blown board

[kwatt]

I’d need to try to remember at some point tomorrow afternoon to look up the programming stuff for that board as some of the functions can be altered depending on the spec. That’s the first I’ll get a chance at best, sorry, been a bit busy.

K.

[Hektor]

Many thanks but I think I may have got there with some intensive googling and a bit of playing around. I found the equivalent Akso manual here: Download Asko WM25 Service Manual | ManualsLib which says you need to press S5 or S6 during startup, but since I don’t have those on my model I pressed the Delay Start button S10 on startup, selected option with, I think Start button S1 but may be mistaken. Then it changed from (presumably) Super Rinse to Delay start. I’ll get the wife to verify in the morning but all seems good.

[kwatt]

Some of the button numbers they give are there, they’re hidden behind the button pad so even though it looks like they’re not there, they are. From memory.

If it’s the correct manual it shows the positions of them on it.

And it is the WM25 series.

K.

[Author]

Posts