[24mech]

Re: F&P MW511 lights 3+4+8 on solid and beeping

Hi there I looked deeper into the fault code I got and worked it out as 0011001 = code 49 I looked around on here and worked that out to be cold water intake circuit, so I took the covers off and had a look at the solinoid it was at 60 ohms I took a look at the pcb and found some corrosion causing cross conections across 4 lines. I cleaned off the corrosion and rebuilt the washer. everything working perfectly again now thanks for your help with this guys. 😀

[Author]

Posts