[a.higgs]

Dave,
Thanks for getting back to me… I’ll have a more thorough look!

Andy

[a.higgs]

That is the one, with the program selections and on/off switch, which I have already sent to QER. Is there / should there be an additional one?

[a.higgs]

Dave,
You were very helpful as I investigated a problem with the above AEG Dishwasher Favorit 50750VI, PNC 911 234 548 02.
For domestic reasons, I have not been able to deal with it until last week, when I sent the PCB (RAFI 5.40 552.602-005, EE214/3), removed from the controls in the front door, to QER as above. Yesterday someone from QER phoned me to say (though they are not domestic appliance repairers), that there must be another board that they would need to check. I have removed the rest of the front panel and a rear panel where the mains cable enters and can not see a second PCB.
Would you be able to tell me the location of any second PCB which can be removed and checked?

Andy

[a.higgs]

Dave,
You are correct. I made an error, it is 911 234 548 02. If the board is obselete, then repair is the only option. I’ve never soldered on a board and may end up making the situation worse. So I’ll have to see if there is anyone who could do it locally or mail the board to someone who would do it.

Happy New Year,
Andy

[a.higgs]

electrofix wrote:sounds like the Triac on the board that cotrols the dispenser is probably faulty

Dave

Dave,
Thanks for your swift reply & I apologise for my delayed response.
Is the Triac a generic available spare, or would a new board still be available for this model and a better option?
Andy

[Author]

Posts