abbots

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 510 total)
1 2 3 … 32 33 34
  • Author
    Posts
  • August 16, 2016 at 6:57 pm in reply to: beko WM wiring fault #440217
    abbots
    Participant

    Re: beko WM wiring fault

    cheers Buddy,
    i’ll give it a go.
    john

    August 28, 2014 at 9:29 pm in reply to: candy oven door glass #418402
    abbots
    Participant

    Re: candy oven door glass

    ok,
    it is the number the customer gave me, i’ll tell them to check it,
    cheers.
    john

    June 18, 2014 at 7:33 am in reply to: lamona grill element #415364
    abbots
    Participant

    Re: lamona grill element

    JOQD7DBC302139F

    cheers.
    jk

    February 11, 2014 at 4:31 pm in reply to: miele washer drain pump #409403
    abbots
    Participant

    Re: miele washer drain pump

    thanks for that,
    john

    June 24, 2013 at 2:14 pm in reply to: whirlpool washer dispensor #396542
    abbots
    Participant

    Re: whirlpool washer dispensor

    can anyone help with part number please, the customer is driving me mad.
    thanks.
    john

    April 20, 2013 at 11:50 am in reply to: baumatic BHD5 PCB #393769
    abbots
    Participant

    Re: baumatic BHD5 PCB

    top man thanks

    April 20, 2013 at 10:30 am in reply to: baumatic BHD5 PCB #393767
    abbots
    Participant

    Re: baumatic BHD5 PCB

    i was thinking along the same lines, i tested the NTC by putting it in the oven then the fridge, seems to be working correctly,and it’s now obsolete anyway.
    can’t think of anything else but the PCB.
    any ideas?
    jk

    April 18, 2013 at 8:57 pm in reply to: baumatic BHD5 PCB #393765
    abbots
    Participant

    Re: baumatic BHD5 PCB

    fills OK,washes OK, drains after about 30 mins and beeps continuously, lights on top flash.
    NTC is about 5.8Kohms at 20deg.
    thermal limiter by element was open circuit-now reset.
    no obvious PCB or cable damage, seems to be overheating.
    any ideas much appreciated.
    cheers

    April 17, 2013 at 6:37 pm in reply to: dishwasher fault #388477
    abbots
    Participant

    Re: dishwasher fault

    hi,
    still struggling with this one.
    can anyone tell me approx. resistance value of the NTC situated in the front door please.
    cheers.
    john

    February 4, 2013 at 10:37 pm in reply to: dishwasher fault #388476
    abbots
    Participant

    Re: dishwasher fault

    cheers,
    i’ll have a look because i’m not getting very far with this.
    jk

    January 31, 2013 at 7:27 pm in reply to: dishwasher fault #388474
    abbots
    Participant

    Re: dishwasher fault

    hi,
    struggling with this one, can anyone tell me if there are any thermal limiters or ntc devices on the machine, i can’t seem to get any info. on this at all.
    if there is can you give me some part numbers please, i’ll try changing them all if neccessary.
    cheers.
    john

    December 5, 2012 at 6:43 pm in reply to: belling oven fan problem #385899
    abbots
    Participant

    Re: belling oven fan problem

    top man

    November 19, 2012 at 1:45 pm in reply to: lux top and bottom oven hinges #375562
    abbots
    Participant

    Re: lux top and bottom oven hinges

    i didn’t i’m affraid, i had to replace both doors.
    jk

    August 31, 2012 at 5:58 am in reply to: belling main oven selector switch #380388
    abbots
    Participant

    Re: belling main oven selector switch

    cheers mate

    June 21, 2012 at 3:55 pm in reply to: defrost heater #376863
    abbots
    Participant

    Re: defrost heater

    hi,
    i’ve been told this may come as a evaporator and heater unit combined, if so has any one got a part number for the evaporator please?
    thanks.
    john

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 510 total)
1 2 3 … 32 33 34