Forum Replies Created
-
AuthorPosts
-
March 26, 2021 at 2:46 pm in reply to: Zanussi Washing Machine – replaced pump but still get E20 and doesn’t drain properly #475928
acr
Participantelectrofix wrote:in that case you have a blockage you just have to find it
i would take the sump hose off the drum first
I assume you have tried taking the outlet hose off the sink or where ever its connected and tried draining into a bucket. Just to eliminate blocked sinks etc
Dave
OK thanks, yep i’ve got the outlet hose draining in to a bucket – i’m not sure where the sump hose is but I’ll google it 🙂
Thanks for your helpMarch 26, 2021 at 1:44 pm in reply to: Zanussi Washing Machine – replaced pump but still get E20 and doesn’t drain properly #475926acr
Participantelectrofix wrote:fill with water does it
A drain quickly so you can see the water going down and then reports E20
B drains very slowly and reports E20 after which there is still water in the drum
Dave
B – very slow
March 26, 2021 at 8:32 am in reply to: Zanussi Washing Machine – replaced pump but still get E20 and doesn’t drain properly #475924acr
Participantelectrofix wrote:if you fill it with water and then select drain how long does it take to drain it ?
Dave
Thanks for the reply Dave – if i just switch it to the drain programme it doesn’t finish draining – it starts and does about half and then freezes but doesn’t give an error code. I can get it to empty by repeatedly restarting the drain programme. If I try a normal programme it seems to work fine but then can’t spin because of the water so then gives an E20 error code
-
AuthorPosts
