Forum Replies Created
-
Posts
-
I have replaced the springs exactly as they were fit by the factory. I thought they looked a bit weird, but though…what do I know.
Conducting further investigations based on your feedback.
Top concrete weight and door removed.
I found this spring tensioner off the seal. See video:
https://youtube.com/shorts/NkZVMlW7RrU?si=f68YtEzlb1tyVYOS
Hey guys,
A big thank you to all of your input!
Just to clear a few things up, the machine has had this issue from day one and it was not caused over the 7 months period.
I live on my own, I do 1-2 cycles a week, so no heavy use of the machine.I still believe something was damaged in transit, but still trying to figure out what.
I am starting to believe that it is something to do with the front weight balance as it is the only thing I have to addressed yet.Another note is that when it starts turning the laundry, the inner drum seems to be bouncing all over the place in an elliptical motion.
I have tried to make a video when it spins at 1400 RPM, however, I have deemed it unsafe and had to lean on it in, otherwise I could see the whole thing disintegrating itself.
Will try post some more videos.
THANK YOU AGAIN!!
