Forum Replies Created
-
Posts
-
Re: Unable to find model number or fit decor door.
It’s supposed to be a straight fit onto the door. I’ve held a piece of board on the front at the edge as I’ve opened the freezer door. Very clever hinge movement, the door moves sideways as it starts to swing out and then tucks back in as it reaches fully open, thus avoiding the cabinet doors adjacent to the freezer.
Andy.
Re: Unable to find model number or fit decor door.
Ta for that, but it seems that’s a slider door system. I’ve now figured out that this is, as I originally thought, a door-on-door mounting whereby the decor/furniture door is fitted directly onto the freezer door. The threaded holes (opposite side to the hinges) are simply mounting points should you switch the opening direction. The top “buttons” seem to be threaded adjusters to set the depth of the gap between the doors. The lower “buttons” are just pushed in (not threaded) and can be turned through a slot in the back of their shaft (the holes passes right through the door and can be accessed from inside by pulling back the door seal).
If no-one recognises this fitting system then I may have to resort to a tube of Gripfill, not very cultured but functional 🙂
Andy J.
