[alanpj]

Re: AEG Lavamat Turbo 16850 not drying

Hi all,
See my recent posting under ‘16830’ – if the condensor is blocked (error code E20 not fixed by cleaning the filter), you can clean it out from the top, you don’t even need to take the back off.
Regards, alanpj

[alanpj]

Re: AEG 16830 Lavamat Turbo E20 error on drying cycles ONLY

Hi all
I have a nearly 4 year old AEG Lavamat 16850 (not 16830) and tried to follow these instructions, but the condensor was impossible to remove. The service engineer kindly showed me how to remove the fan from the top – two bolts with cross heads, disconnect the two wires, and unclip from the drain hose – also take out three bolts without cross heads from the top metal vent pipe – then the fan can be loosened and taken out, and the condensor can be cleaned out using a wire coat hangar. You can hardly believe the amount of fluff. There is no need to take off the back of the machine, or to disconnect the bottom of the condensor (which I had done, and the service engineer also kindly refitted that !)
Regards, alanpj

[Author]

Posts