Forum Replies Created
-
Posts
-
Re: Neff S5943X2GB Integrated washer being a pain!
Have also just checked the PCB for cold solder joints/damage.
All looks AOK on that side
Re: Neff S5943X2GB Integrated washer being a pain!
Right, the NTC and temp switch unit on the top of the heater, the right hand pin (with the smaller diameter wires) is showing open circuit. The ticker red wires are 0 ohms.
Does that mean that is faulty?
Re: Neff S5943X2GB Integrated washer being a pain!
With the water presence switch bridged it still doesnt heat so that rules out a faulty switch
Re: Neff S5943X2GB Integrated washer being a pain!
Ok, a quick read seems to indicate that the microswitch is a water presence switch, so I assume without water in it, it wont show closed.
Re: Neff S5943X2GB Integrated washer being a pain!
OK, 24 ohms between the elements.
The black switch device is infinite or open circuit, but im not sure what its meant to measure?
Re: Neff S5943X2GB Integrated washer being a pain!
Im pretty handy with a multimeter. Happy to do some testing. A bit of guidance on locating the heater?
