andy19_64

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Hotpoint WF541P flashing lights #273325
    andy19_64
    Participant

    Re: Hotpoint WF541P flashing lights

    Thanks for the reply. I take it that control module is the box at the back of the machine in the bottom corner.
    Is this is an easy job i do myself or should i get Hotpoint in to do this.
    If i can do this myself can anybody recomend where to buy the spare part from.
    Cheers

    in reply to: Hotpoint WF541P flashing lights #273323
    andy19_64
    Participant

    Re: Hotpoint WF541P flashing lights

    Hi, Yes there is 4 lights flashing down the left side
    1 = Wash Enhance
    2 = Reduced Creases
    3 = Rinse Hold
    4 = Mini load
    Plus the final spin and on/off button.

    These lights were flashing when i turned the power on at the wall.
    I tried switching the power on and off at the wall and eventually all the lights went out, i then pressed the on/off button and now i have all the lights flashing, 5 down the side and all of them along the top.

    DOH!!

    Andy

Viewing 2 posts - 1 through 2 (of 2 total)