Forum Replies Created
-
Posts
-
Re: Hotpint WF860 cycle stuck on 0:01 for 5 hours!
wow, i never realised the electronics were the same as the indesit. If i had i wouldn’t have brought it! I had an indesit machine before and had nothing but trouble. At least i know now!
Re: indesit w123s error code 8
Ok, i’ll check the connections. The motor does run though so it can’t be a connection thats come off. It does the same thing when i try a spin cycle as well. Pump starts and drum rotates for about 15 seconds, then the drum stops and the dial rotates with the error code 1.
Re: indesit w123s error code 8
Update: Machine worked fine for the first day, did about 3 loads with no probs. It was then used the following day and started doing the same thing. The only difference is now the flash error code is 1 🙁 . Any ideas?
Re: indesit w123s error code 8
Thanks for the responses. Fingers crossed it seems ok now. I stripped it down at the weekend and checked the pump for gunk, cleaned the moulded plastic tray from the water inlet to the detergent tray and pulled off and checked the connection of all connectors. Put it all back together and it seems to be ok. Have done 4 loads now with no problems. Maybe an intermittent contact.
