[AndyN]

Re: Creda T602CW doesn’t run

Penguin45, thanks for a very quick response. I took the relay out and it doesn’t appear to be a latching type. I feel that this is the defective part though as I measured the voltage across the coil and even when it’s present the relay doesn’t switch.

When it worked properly for once the relay had visibly switched.

I couldn’t find the part number in the shop that you mentioned as I wanted to compare it to the device I have in my hand. However a qucik search got me 1701624 which does look identical to the Schrack RM505730 that I have here.

There’s a smaller PCB mounted relay near to the one I’ve removed but that sounds like it’s working OK.

I guess what I need to know is

1) Is the relay that I have the one you were describing
and
2) If it’s not given that it appears to be defective should I just replace it or look at the other relay first.

Sorry for the complication.

Andy.

[Author]

Posts