Andyod

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 26, 2005 at 10:10 pm in reply to: Zanussi FJ1093 Fills slowly! #149994
    Andyod
    Participant

    Re: Zanussi FJ1093 Fills slowly!

    No self bore taps, all put in correctly. It colud be the cold fill only thats working, I may have swiched the wires to the valves. But the problem remains, fills quickly now, but only one valve will open, both are new. I have 230vac on one, measured when it fills, but only 25vac on the other, it shows 0volts when no fill is required. Is it a broken program unit? Do I bother looking further, or scrap the bugger. Your words of wisdom are required. Thanks, Andy………

    October 25, 2005 at 7:41 pm in reply to: Zanussi FJ1093 Fills slowly! #149992
    Andyod
    Participant

    Re: Zanussi FJ1093 Fills slowly!

    I have replaced both inlet valves, but still no joy. The hot will fill, but the cold not. I have measured the power to the cold valve, It’s not 230v… I think the programe unit is faulty. Am I right? Can I get a new one?

    October 12, 2005 at 9:35 pm in reply to: Zanussi FJ1093 Fills slowly! #149991
    Andyod
    Participant

    Re: Zanussi FJ1093 Fills slowly!

    Many thanks for the info, I will try the new cold water valve. I have checked the filters & cold water presure, they seem fine. I will let you hear how it works.
    Thanks again.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)