[asteve]

Re: bauknecht gsxp 7988

Penguin45 wrote:Unlucky, I’m afraid. The fill matrix and a number of water unions are on that side, so it will have to come out and be stripped down.

If you’re not sure how to proceed, now’s the time to consider pro help – click the repairs@ link to find a UKW engineer in your area.

Regards,
Penguin45. thanks for your help penguin
your a top man [see private message ]

[asteve]

Re: bauknecht gsxp 7988

Penguin45 wrote:Get the tray drained and the machine should reset. Set the rinse programme and use a torch to see if there is a leak in use. If there is, it will get complicated.

You may just hit lucky and had a bit of overfoaming (multifunction tablets 👿 ).

Penguin45.i have put it on rinse and can see it leaking it looks like it is coming from my left hand side behind the salt storage somewhere
the right hand side seems pretty dry

[asteve]

Re: bauknecht gsxp 7988

Penguin45 wrote:The lower front panel will allow you to access the tray under the machine. There are four screws, BTW.

Penguin45. right peng i have got the panel off and there is a bit of water just come out onto a towel excuse me for been thick peng but i just post letters for a living and drink beer i am not really into dishwashers but i hate washing up right what next im ready

[asteve]

Re: bauknecht gsxp 7988

ihave taken the kick boards off there is a metal panel with a plastic 50p shaped nut 2 screws holding the panel on and at the right hand side there is a round plastic inlet what next penguin any more help will be welcome
cheers

[asteve]

Re: bauknecht gsxp 7988

thanks for the reply, it is a built in dishwasher ,will i be able to get at the tray from the front of the machine, or will i have to get the wife to take the kitchen to pieces cheers 😆

[Author]

Posts