[AylesDar]

Re: Servis M3810s Bearing Kit

Well, had another go at this little project today, finally got the pulley off and have removed the back plate with inner drum attached.. Have undone 8 bolts around drum which attach it to the spider, but now the drum will not come off, is it meant to just fall off once the bolts are undone? I can hardly get anything to wedge into where the bolts fed, so prising it off is near impossible, it seems loose on the spider mounts but feels either like I need 8 pairs of hands to be prising and wedging at the 4 different mounting points, or theres something else still holding it attached… Grrrrr, any ideas??? Please help.. I wont be beaten, lol ..

[AylesDar]

Re: Servis M3810s Bearing Kit

Thank for quick response 🙂
So that’ll be the inner drum coming out with the back plate yea? Can I rightly presume the outer drum will stay in place on its mountings? ooh, and whats the deal with the centre hex bolt holding the pulley wheel on (i presume) I just been trying to get it to turn, and it wont.. Is it welded in there or is there some secret to it becoming free? lol
Appreciate your help..

[AylesDar]

Re: Servis M3810s Bearing Kit

Just need a bit more advice before I start unbolting everything.. Am I right in thinking I can replace the bearings on this without having to remove the whole drum?

.

Do I simply need to remove the pulley wheel and unbolt the spider thing off the back of the drum to get at the bearings.. Anyother helpful advice greatly appreciated.. Thanks.

[AylesDar]

Re: Servis M3810s Bearing Kit

Cool, so its a pretty generic kit then 🙂
Many thanks..

[Author]

Posts