[ayrstorm]

Re: Zanussi ZWF1421W drum stuck

been fishing – caught a partial shredded black sock :rolls:

refitted the belt that had come off, just done a spin only cycle at 700 and drum running smooth

Thank you for the pointers in solving this.
Danny.

PS – is there already a thread or FAQ that explains how socks and other items end up on the wrong side of drums and cause issues like this?

[ayrstorm]

Re: Zanussi ZWF1421W drum stuck

a bit of gentle persuassion and the drum no longer stuck fast.

as I move it round, there is one point in the rotation it gets stiffer and a little extra effort to rotate, then it is back to less effort.

with the sealed plastic tub – little opportunity to see what is the cause of that – a suggestion of pulling out heater will help fish? where am I looking to remove this?

Thanks.

[ayrstorm]

Re: Zanussi ZWF1421W drum stuck

drum looks level with the front seals still

[ayrstorm]

the belt is still in one piece – no sign of ‘burned through’

[ayrstorm]

Re: Zanussi ZWF1421W drum stuck

yes – that was an interesting read

finally got machne out from under the bench, of course unplugged, but more interesting found a belt underneath it!!!!

printing on it is 132353100 hutchinson poly v made in EU 5PJE 1200

is this the belt that was being suggested to be removed – if so the mahine did it itself 😕

so drum is stuck fast and this belt was lying on ground.
any thoughts?

Thanks.

[ayrstorm]

Re: Indesit DI620UK control panel light 4 fast flash

measured resistance accross the terminals connected to the heater – 28ohm

[ayrstorm]

Re: Zanussi Aquacycle or Jetsystem

so are they basically the same then – but a rebranding? Seen Aquacycle and Jetsystem side by side so assumed there is a subtle difference in workings.

[Author]

Posts