Forum Replies Created
-
Posts
-
Re: Winterhalter GS660 switches on with P27 in the display
Hi, P27 is the parameter for the external dosing strip. This has a shortcut via certain buttons on the diplay PCB. I have changed this board many times and through experience I check the buttons are all working/ not being pressed against the front panel before nipping up the securing nuts. I would slacken them slightly and move the pcb then rescure to see if this works. I presume the button facia is OK and isn’t pressing in against the buttons?
As for losing water, the unit should maintain its correct level via the pressure tranmitter. i.e. only drain off when the level is too high. A possibility is the mediamat on the wash system. If these don’t work correctly more water than designed is put down the drain when washing but in reality it could be lots of things, patially blocked pressure chamber, faulty pressure transmitter(or more likely a poor electrical connection)
Barrie
Re: Hotpoint WT940 F-02 error
EMW? ❓
Wrong washing machine! tell me about it! 1st one tore the shock mounts off and I had a chance of a Bosch or Siemens about 10 years ago at a good price but the wife didn’t think they looked good so a Zanussi was bought, been rubbish machines ever since. Problem is they keep breaking down at the wrong times. :rolls:
Bazza
Re: Hotpoint WT940 F-02 error
Thanks for that, will look into the fixed price repair as the motor, module and EPROM are coming to over £200! Before I do I’ll try and see if I can get them through work cheaper, hate paying people to do something I can do myself. 👿
If m/c is replaced then it will be the 6th washing m/c I’ve had in 12 years :rolls:
Thanks again,
Bazza
