Beau55

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 12, 2013 at 8:20 pm in reply to: Siemens Dishwasher faults #404146
    Beau55
    Participant

    Re: Siemens Dishwasher faults

    I assume the PCB is behind the door and part of the programme, clock, buttons etc

    November 12, 2013 at 7:11 pm in reply to: Siemens Dishwasher faults #404144
    Beau55
    Participant

    Re: Siemens Dishwasher faults

    Disconnected both micro switches and checked switching function. both OK. Tried resetting with both detached but no joy. Assume default to pump when disconnected. Still pumping out door open or not. Any other resetting tips for the anti flood switch. Seems to function ok. Clock not showing full 199 when disconnected.

    November 12, 2013 at 10:17 am in reply to: Siemens Dishwasher faults #404142
    Beau55
    Participant

    Re: Siemens Dishwasher faults

    No water in moulded base only inside, in sump area and a very small amount.

    November 11, 2013 at 10:17 pm in reply to: Siemens Dishwasher faults #404140
    Beau55
    Participant

    Re: Siemens Dishwasher faults

    Tried to reset but it did not stop after 120secs. Machine starts after very short pause when switched on with door open or not. no difference closing and opening door during this trial. First and third buttons are lite when switched on and go out when pressed together for the reset

    November 9, 2013 at 7:03 pm in reply to: Siemens Dishwasher faults #404138
    Beau55
    Participant

    Re: Siemens Dishwasher faults

    Believe numbers are as follows
    ENR SE24A230GB/17
    FD 8210 960026

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)