[befuzzeled]

Re: Indesit WD10 F10 Error Code

OK I’ve fixed it 😀

I took the processor board out and noticed a track was burnt out

There is a small track on the left hand side of the PCB that is VERY
close to the mains supply track.

This must be a really common problem on this PCB

I’ve replaced the track with a link and the whole thing came to life.

What a good all round engineer am I !!! hehehe

Thought I’d share that with you all

Thanks for the assistance

“One Happy Wife Now”

WooooooHooooooooo

[befuzzeled]

Re: Indesit WD10 F10 Error Code

OK So I’ve checked the pressure switch
very gentle blow and it clicks, release pressure and it clicks again

I’ve dis-assembled the waste unit, all is clean and no gunk

Before I put it back together, are there any other checks to be made
in this area, as it’ll be a pain to re-assemble it only to have to strip it again.

Cheers

[Author]

Posts