Forum Replies Created
-
Posts
-
Re: Zanussi Jetsystem starting to fail
Thanks for detailing the how the failure occurred.
With regards to the parts, how much am i looking at for the tub front half as the rest of the parts comes to about £70 ?Re: WJD1357 Drain Pump removal query
New pump arrived from shop@ this afternoon – now fitted and working.
The way to remove the pump is to find the 2 lugs in the plastic base of the machine just where the grey part of the pump is.
Force the nose of a largish set of snubbed nose pliers in between the lugs to separate them. This will allow you to pull the pump straight down to release it.Again, Steve Many Thanks
Re: WJD1357 Drain Pump removal query
I have seen another post where is was suggested to undo the 3 screws to remove the pump. i have done this and managed to remove the pump.
I found that the impeller was loose, so have resat it and reconnected it up – now when it tries to empty i get the ‘E20’ error.
I may have connected the wires in reverse, would this cause the error or is the pump knackered ?
