[bmck]

Re: Electric Grill Thermostat/Energy Regulator

Hey Dave
I just wanted to say Thank you for this post!
I bought a replacement dual-control unit for my Zce7700x, and it came this morning. Unfortunately, none of the terminal markings were the same as those on my 1999 cooker. The leaflet which came with it referred to A,B & C terminals? There are no such markings on the part, so I was totally lost.
After many hours of searching the web, I found this single post which solved my problem!! A simple explanation of old markings -> new markings.
Thank you so much!

electrofix wrote:from schematic

live is P1 old unit prob line
neutral is 4 old one prob neut

s1 and s2 are the pilot light only if you cooker has on to say when ring switched on. on old uniot will be labled pilot. to get it working you will have to add a link wire from live to s1 or s2 from P1 then you pilot goes to the other

2 is load A on old unit when one single element comes on
P2 is load b the second element

hope this helps

Dave

[Author]

Posts